What matters should be paid attention to when using high-speed centrifuges

Release time：2022-12-7 Number of hits：484

When choosing a high-speed centrifuge, the higher the speed of the centrifuge, the better the separation effect will be, but we also need to pay attention to one point in the entire process of use, high-speed centrifuges relatively need to pay attention to some details of the operation will be more, if blind to use, it may affect the normal use of centrifuges. What do you need to pay attention to when using high-speed centrifuge operation? Here is a brief introduction.

The use of high-speed centrifuges, we in the entire use of the process, first of all, must ensure that the entire workbench is smooth and solid, without any bumps, and the entire operation of the work room must be neat and clean, to ensure ventilation, and must have a certain degree of dryness, before opening the power must be checked in advance of the centrifuge inspection. There is no problem before you can turn on the power source switch.

Then, after the indicator light is displayed, you can perform subsequent operations. Only after confirming the indicator light, we can ensure the registered operation of the centrifuge, of course, only to do a simple measure, and not directly into the operation of the coordination after the need to turn off the power switch.

Then open the centrifuge to wipe the inner cavity or rotary head, and then put the test tube with the same measurement, and then close the cover of the centrifuge, so that you can periodically re-open the power switch, and then adjust the required speed.

Now we have a better understanding of the correct use of high-speed centrifuge operation methods, when wiping the rotor head or the inner compartment, we must pay attention to turn off the power, close the centrifugal cover, otherwise it is likely to bring certain problems to our operation safety.

And before each shutdown must first rotate the speed to the smallest position before you can turn off the power switch, otherwise in the process of high-speed operation to turn off the power switch, it may affect the use of the rotor.